Cleanroom Ionizing Blow-Off Gun Onboard LED indicates when IonGun™ is connected to power and ready for operation. Quickly and safely neutralizes static surface charges to protect sensitive parts against electro-static discharge Provides a burst of clean air or nitrogen to dislodge and remove particles held by static attraction Low-voltage power supply provides intrinsically balanced stream of ions with minimal EMI/RFI Discharge time: 1000V to 50V in less than three seconds (inlet pressure of 30 psi, measured at 6" from target) Ergonomic, durable polymer gun is easy to handle and operate without hyperextending the wrist In-line capsule filters ensure purity of gas feed (clean dry air or nitrogen) Includes transformer and convenient hanging bracket Terra's Cleanroom Ionizing Blow-Off Gun safely and effectively removes small contaminants from sensitive surfaces and minimizes the chance of ESD-related damage. Video of Anti-Static Gun with LED Light Nozzle to Eliminate ESD

Cleanroom Ionizing Blow-Off Gun with Replacement Power Supply and Filters Cleanroom Ionizing Blow-Off Gun Replacement Ionizing Power Supply Replacement In-Line Capsule Filters Features and Benefits of Cleanroom Ionizing Blow-Off Gun for Static Control FEATURES & BENEFITS Cleanroom Ionizing Blow-Off Gun Safe Operation of Terra Universal Cleanroom Anti Static Gun The low input voltage (24 VAC) design eliminates shock hazards to both operators and parts, and a step-down transformer is included for 120VAC power use (220-volt transformer available). It also minimizes EMI (electro-magnetic interference) making it safe for operation around high-precision electronics equipment. Lightweight and Ergonomic Anti-Static Air Gun Design with Filtered Air or Nitrogen All components are designed for cleanliness, durability, and safety. The rugged polymer case is designed to minimize strain to operator wrist and hand. The scalloped nozzle tip safely recesses the ion emitters to guard against contact with operator or parts.

The anti-static gun uses either filtered air or nitrogen to provide the dispersing force necessary to direct the ions to the target surface. It operates with virtually no particle generation, and the force of the ion burst is easy to modify by adjusting the gas feed pressure (recommended pressure: 15 – 30 psi, depending on distance to target surface). Emitters are made of corrosion-resistant titanium to ensure a long service life—several years when used with filtered gas supply. Tip replacement requires only seconds and entails no disassembly. Specify an optional in-line capsule filter to ensure the purity of the incoming feed gas. Standard kit includes an Ionizing Blow-Off Gun, 8-foot x 0.25" (2438 mm x 6 mm)-diameter polyethylene gas tubing, a coiled low-voltage power cable, 8 feet (2438) when fully extended, transformer and 0.4-micron in-line filter. Cable attaches to the gun and power transformer by means of telephone-type jacks for fast, easy installation. Input Pressure vs. Discharge Time of Ionized Air Gun

At each of the three test distances, 6", 12" and 24" (152 mm, 305 mm, 610 mm) from the target surface, you can observe an optimal input pressure setting, which corresponds with the lowest discharge time. Raising the pressure higher than this point results in an increase in the discharge time (the curve swings to the right) because higher pressure drives the ions at the target with too much force, causing uneven dispersal and compromising discharge effectiveness. Sia T ShirtsLowering the pressure below this point results in too little force; Laptop Battery Cell Ebaythe ions require longer to reach the target and many disperse before discharging the surface.Travel Sea Fishing Rods Specifications for Terra Cleanroom Ionizing Blow-Off Gun Specifications (see performance curves)

Applications for Cleanroom Ionizing Blow-Off Gun Powder packaging (chemical, food and beverage) Pharma and nutraceutical packaging Static-Control MethodsA technical review of the advantages and applications of static neutralizing ionization equipment, static-dissipative materials, and Faraday-cage cabinets. IonGun Ionizing Air Gun: Doc. # 1800-44ISO Class 5 Self-balancing In-tool Blower with FMS Interface Model 6422e Simco-Ion's ISO Class 5 Self-balancing In-tool Blower with FMS Interface Model 6422e is the most efficient small blower of its kind for controlling static discharge in hard-to-reach areas. The Model 6422e meets the challenge of cost and features that your process demands by delivering worry-free ionization. ISO Class 5 Blower with FMS Interface Model 6432e Simco-Ion's ISO Class 5 Ionizing Blower Model 6432e with FMS Interface controls static discharge in assembly, inspection, packaging areas and in-tool wherever static build-up can cause contamination, ESD, material-handling problems or microprocessor lock-up.

ISO Class 4 Self-cleaning Benchtop Blower Model 5802i Simco-Ion's ISO Class 4 Self-cleaning Benchtop Ionizer Model 5802i with Sensor Control provides reliable, fast static charge control for bench top work areas and small spaces, allowing optimal electrostatics management that minimizes cost and maximizes protection for ESD-sensitive areas. An internal automatic balance correction system ensures ionization continues to reach your target with complete accuracy. ISO Class 4 Low Balance Overhead Ionizing Blower Model 5810i Simco-Ion's ISO Class 4 Low Balance Overhead Ionizing Blower Model 5810i with Sensor Control is designed to provide industry-leading balanced ionization performance in cleanroom environments. The Model 5810i is certified for use in ISO Class 4 cleanrooms (Fed. Std. 209(e) Class 10). The ionizer can operate with external sensors to maintain precise balance (better than ±1V) by altering ion output and adapting to environment changes. ISO Class 4 Compact Ionizing Blower Model 5822i

Simco-Ion's ISO Class 4 Compact Ionizing Blower Model 5822i with Sensor Control is designed to meet small-footprint ionizer requirements in automated process tools, offering exceptional performance in hard disk drive manufacturing and back-end semiconductor environments. The ionizer maintains a ±3V or better balance standard and exceptional ±1V with the optional external feedback system. Guardian CR2000 Clean Low Balance Ionizing Overhead Blower Simco-Ion’s Guardian CR2000 Cleanroom-rated Overhead Ionizing Blower is designed specifically for use in cleanroom applications. The Guardian CR2000 features a patented circuit that results in balanced delivery of positive and negative ions, which ensures that the unit will maintain an ion balance of 0 ±5V. Balance stability is further enhanced by use of Simco-Ion’s unique “ion shields” at the fan outputs to reduce parasitic ion loss. ISO Class 4 Lightweight Fast Discharge Air Gun Model 6115 Simco-Ion's ISO Class 4 Lightweight Fast Discharge Auto Balance Ionizing Blow-off Gun AirForce Model 6115 was designed with the operator in mind.