Baby Ritzy Rider™ Infant Car Seat Cover Baby Ritzy Rider™ Infant Car Seat Cover Universal, reversible cover that fits over existing manufacturers' covers and extends the life of your baby's car seat.Features large openings allowing generous access to the safety harness with no need to feed or undo straps.Includes a reversible matching hood and two reversible neck strap covers.Machine wash in cold water with like colors, no bleach, line dry recommended.Reversible cover and hood create 4 distinct looks.100% cotton.Velcro closures for easy-on, easy-off without undoing straps.2 pacifier pockets and 2 matching neck straps. Go ahead - dress things up a bit. Our washable car seat covers are reversible (solid plush minky on one side, a snappy pattern on the other) and brighten your on-the-go routine. Large openings allow easy access to the safety harness. So buckle up and enjoy the wildly colorful ride. Home  >  Car Seats  >  All-in-1 Car Seats  >  4Ever™ All-in-1 Car Seat With Safety Surround™ Side Impact Protection

4-in-1 seat grows with your child, so you can enjoy 10 years of use, from 4 - 120 lb. Safety Surround™ Side Impact TechnologyMeets BOTH Graco's Side Impact Testing and Europe's Side Impact standard* (*Draft Standard)6-position recline adjust to fit and keep your growing child; it's comfy for them and convenient for youSimply Safe Adjust™ Harness System is safe & simpleInRight™ LATCH system for an easy, one-second LATCH attachmentFussFree harness to get baby in and out easilySide-impact tested* (*In addition to meeting or exceeding all applicable US safety standards, the Graco 4Ever car seat has been side impact tested for occupant retention solely with the built-in 5-point harness system)Engineered & crash tested to meet or exceed US standard FMVSS 213Washable seat cover is easy to Red Curtains 66 X 84remove without removing the harness Steel-reinforced frame provides strength and durabilityIntegrated harness storage compartment holds unused harness straps while in the belt positioning booster modeFeatures an easy-to-read level indicator for hassle-free installationPlush inserts keep your child comfortable EPS, energy absorbing foam for effective impact energy management2 integrated cupholders keeps your child's drinks close at handTeddy Bear Puppies Pics

Graco® 4Ever™ All-in-1 Car Seat featuring Safety Surround™ gives you 10 years with one car seat. It’s comfortable for your child and convenient for you, transitioning from rear-facing infant car seat (4–40 lb.) to forward-facing 5-point harness seat (22–65 lb.) to high-back booster (30–100 lb.) to backless booster (40–120 lb.). For a proper fit, the Simply Safe Adjust™ Harness System and 10-position headrest lets you adjust the harness and headrest together, with no rethreading, and Safety Surround Side Impact Protection provides the best head protection at every stage. Boy London T Shirt AmazonThe 6-position recline keeps your child comfortable, the FussFree harness makes it easy to get your child in and out, and the InRight™ LATCH system with one-second attachment makes installation easy. In February 2014 a new name in the car seat world took us by surprise.  Meet the newest addition to the Wal-Mart car seat lineup, the Urbini Petal rear facing only car seat.

Seat Belt lockoff is a nice addition to the base so you don’t have to lock the seat belt as with some other rear facing only installations.Two position adjustable crotch strap (4.5″, 6.5″), two position hip harness positions, and 4 adjustable height positions make the Petal a very diverse seat that will fit a wide array of infants.Adjustable recline foot allows the seat to be more or less recline depending on the vehicle slope.  It only has 2 positions, but the do allow for use of a tightly rolled towel to achieve the correct recline if you are having an issue getting it correct in your vehicle.Euro belt routing is allowed on the Urbini Petal.  This is a seat belt routing method that several rear facing only seats are incorporating.  Euro routing means that instead of the shoulder belt laying against the vehicle seat when installing the seat without the base, the shoulder belt is instead routed behind the seat.  This helps with rotation and achieving a tighter installation.Infant insert and preemie pillow helps ensure good small infant fit.  

These can be used while the infant is at the bottom 2 harness positions.  The preemie pillow is for infants under 6 lbs.Two harness adjustment loops allows the seat to be used with smaller and larger infants.  Most higher weight infant seats are now incorporating this feature on their seats so that there is enough harness material for the larger infants, but also little enough for the smallest infants.  One difference with the Urbini Petal is that it has velcro on the excess harness so it doesn’t hang off and get in the way.  This is a nice addition, but one problem I noticed with it is that with bigger infants the velcro can snag on the back as well as possibly rub their neck.Car seat release located on the base rather than car seat which allows the seat to be lighter to carry.  The only downfall to this is that in order for the seat to attach to the base, there are 2 metal bars on the back of the seat.  When threading the harness, the user needs to make sure that the straps are under the metal bars.

Jo – Preemie Huggable Images doll – 4 lbs, 17 inches I absolutely LOVE the preemie fit in this seat.  The crotch buckle was right at her diaper, the hip straps were right at her hips, and her shoulders were right at the bottom harness slot.  The infant insert and preemie pillow also helped her fit in the seat perfectly.Fiona – Newborn Huggable Images doll – 7 lbs, 17 inches She also had a great fit using the inside hip strap position, inside crotch buckle position, and infant insert.  The preemie pillow was taken out since it can only be used to 6 lbs.  I also tried her without the infant insert and she fit well without that as well.  She would probably still need rolled receiving blankets beside her head for support, but other than that, she fit very well.  She was right at the 2nd harness slot with and without the infant insert.  The infant insert needs to be removed when moving the harness to slots 3 and 4.Anders He is our long term model and has used the Petal off and on since birth.  

Here are a few photos of him at different ages in the Petal.  Overall his fit has been great.  At birth he weighed 9 lbs 2 oz and had already outgrown the infant insert.  We used rolled receiving blanket to help with slump until he was big enough for it to not be a problem.  The most annoying issue I’ve found lately (6 months) is that the velcro on the harness gets caught up in the slots when I tighten him up.  At 6 months he is right at the 2nd to top harness position.Freya – 21.5 months, 20 lbs, 32″ ***Disclaimer – this child has outgrown the seat due to her head being even with the top of the shell, even though she’s right at the stated height limit.***Considering she is right over the limits of this seat, Freya still fit very well.  Her shoulders were right at the top harness height, hip straps were in the outside position, as well as the crotch buckle being in the outside position.  She was comfy and happy in it.UPDATE – Anders – 13 months, 23 lbs, 30″Anders is at the limit of the Petal with 1″ from the of his head to the top of the shell.  

He still fits fairly well besides being at the limit.  He is at the top harness slot and the larger positions of the hip and crotch straps.The base was a very easy install with lower anchors or seat belt in my 2012 Nissan Quest with leather seats.  The belt geometry can sometimes be difficult when installing seats in this vehicle, so I was very pleasantly surprised at how nice the fit was.The base features a seat belt lock off for easy seat belt install as well as lower anchors.  The lock off is easy to use and I didn’t have any issues with the belt folding over or the clip being hard to lock over the belt.It has a 2 position recline, which may be an issue in some vehicles, but they do allow the use of a tightly rolled towel in case the limited number of reclines is an issue.  They have specified that a pool noodle is not allowed and the foot of the base needs to be folded under into the base when using a rolled towel.It also has a 2 position level on the side of the base.  If the infant is under 20 lbs, the ball needs to be in the blue area, for 20-35 lbs, it needs to be in the grey.  

I was able to get it in both sections by just pulling the recline foot out or putting it back under the base.The Urbini Petal has 2 different install methods for baseless installation.  It is following the same trend as many other rear facing only seats and allows Euro routing when installing baseless.  What this means is instead of laying the shoulder belt against the vehicle seat back, it is placed in a slot on the back of the infant seat.  This slot for Euro routing is NOT a lock off, so the seat belt will still need to be locked when installing with this method.  This routing helps get a tighter install in most vehicles.This has been one of my favorite rear facing only seats that I’ve used with Anders.  He fits well and seems comfortable.  It’s also a very lightweight seat so carrying around all 18 lbs of him doesn’t seem like such a hard thing to do.  The few drawbacks I’ve found are very minor and consist of mostly harness issues.  The harness material is thin and can twist easily, the harness needs to be rethreaded to adjust the hip strap positions making it a bit time consuming, and the velcro can get in the way of tightening as the child gets bigger.